These copies of QuarkXPress™ and QuarkImmedia™ for Macintosh and Power Macintosh are provided “as is” for demonstration and testing purposes only. Quark makes no warranties, either express or implied, concerning the program. We specifically do not warrant the program will operate uninterrupted or error-free. WE DISCLAIM ALL WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. Accordingly, the program should not be used for actual production. Projects created with this version of QuarkImmedia cannot be saved and will need to be recreated to be used successfully in the full-product version of QuarkImmedia.
Table of Contents
• Minimum System Requirements for QuarkImmedia Design Tool 1.01 for Mac OS
• Minimum System Requirements for QuarkImmedia Viewer 1.01 for Mac OS
• Contents of the QuarkImmedia Demonstration Software Package
• Installing the Demonstration Software
• Limitations of the Demonstration Software
• About QuarkImmedia Viewer
• Contacting Quark™
• Legal Notices
Minimum System Requirements for QuarkImmedia Design Tool 1.01 for Mac OS
Software
• QuarkXPress 3.32r5 or QuarkXPress Passport™ 3.32r5
• Mac OS 7.1 for 680x0 processor-based Mac OS-compatible computers
• Mac OS 7.1.2 for PowerPC processor-based Mac OS-compatible computers
• Apple Sound Manager 3.1 extension or System 7.5.3 (which incorporates the Sound Manager into the System software)
• Apple QuickTime 2.1 extension
• Adobe Type Manager for Type 1 fonts
Hardware
• 68030-based or PowerPC processor-based Mac OS-compatible computer
• Monitor capable of displaying 256 colors or grays
• CD–ROM drive, connected directly to the computer or accessed over a network (for installation)
• At least 4MB of free RAM for the QuarkImmedia Design Tool*
Minimum System Requirements for QuarkImmedia Viewer 1.01 for Mac OS
Software
• Mac OS 7.1 for 680x0 processor-based Mac OS-compatible computers
• Mac OS 7.1.2 for PowerPC processor-based Mac OS-compatible computers
• Apple Sound Manager 3.1 extension or System 7.5.3 (which incorporates the Sound Manager into the System software)
• Apple QuickTime 2.1 extension
• AppleScriptLib (PowerPC processor-based Mac OS-compatible computers only); included with all versions of QuarkXPress for Power Macintosh and with System 7.1.2 and later
Hardware
• 68030-based or PowerPC processor-based Mac OS-compatible computer
• Monitor capable of displaying 256 colors or grays
• At least 3MB of free RAM for QuarkImmedia Viewer*
Contents of the QuarkImmedia Demonstration Software Package
• Demonstration versions of QuarkXPress 3.32r5 for Mac OS.
• QuarkXPress 3.32 ReadMe. Consult this file for important and late-breaking information about the QuarkXPress demonstration software.
• QuarkXPress PrintMe. Consult this file for instructions about using the QuarkXPress demonstration software. You can view this document on-screen and print it.
• Demonstration version of QuarkImmedia XT 1.01. Located in the XTension folders in the QuarkXPress Demo folders.
• QuarkImmedia Viewer 1.01 for Mac OS. Located in the QuarkXPress Demo folders.
• QuarkImmedia 1.01 Demo ReadMe the document you are currently reading). Consult this file for important information and late-breaking information about the QuarkImmedia Design Tool and QuarkImmedia Viewer.
• QuarkImmedia PrintMe. Consult this file for instructions about using the QuarkImmedia Design Tool demonstration software. You can view this document on-screen and print it.
• Sample Clip Media. This folder contains animations, button libraries, cursors, a movie, and sounds — multimedia elements you can use to create a demonstration project with the software.
You may sample, adapt, translate, create derivative works, and incorporate individual clips of the clip media into “produced works,” which you may then export and distribute. “Produced works” are defined as media productions created by the end-user in which the primary function and value is the completed production, not the clip media or a work derived from the clip media. The movie clip was provided courtesy of Four Palms, Inc. They can be reached at 1-800-747-2567 or http://www.fourpalms.com.
• Connect with QuarkImmedia. A QuarkImmedia project that introduces QuarkImmedia Viewer and contains an Internet link to the Quark Web site formatted with QuarkImmedia.
• QuarkImmedia Overview. A QuarkImmedia project that demonstrates some of the capabilities of QuarkImmedia and contains a features list and system requirements.
• Drag Contents to System Folder folder. Contains system software required for this demonstration version of QuarkImmedia.
Installing the Demonstration Software
To use the demonstration software, insert the CD–ROM in the CD–ROM drive and complete the following eight steps:
1. Choose a version of the demonstration software: Open either the Power Macintosh Demo or Macintosh Demo folder and select the folder for the language you want to use.
2. Drag the folder to the computer hard drive.
3. Open the Drag Contents to System Folder folder on the CD; open the folder for the language you want to use; then open either the Macintosh (68K) or Power Macintosh folder.
4. Open your System folder. Drag the Type Libraries folder onto the Extensions folder in your System folder.
5. Close your System folder. Drag QuickTime and the other remaining files onto your System Folder icon. Important: If you already have a copy of any of these files installed, an alert will display, asking if you want to replace the existing copy of the file. If the installed version of any file is newer than the version on this CD–ROM, do not replace the installed version with the version from this CD–ROM.
6. If you are using a PowerPC processor-based Mac OS computer, verify that the AppleScriptLib file is either in the Extensions folder in your System folder or in the same folder as the demonstration version of QuarkXPress. (An AppleScriptLib file is included in each Power Macintosh version QuarkXPress Demo folder — drag it to the Extensions folder in your System folder if you don’t already have a copy there.)
7. After installing, restart your computer.
8. Open the folder on the computer’s hard drive containing the demonstration software and double-click the QuarkXPress application icon. QuarkImmedia will be loaded when you launch QuarkXPress.
Limitations of the Demonstration Software
This demonstration copy of QuarkImmedia works with the demonstration copy of QuarkXPress and is fully functional except for the following limitations:
• Projects and documents cannot be saved.
• Up to five project pages may be printed, and the words “QuarkXPress Demo” will print across each page.
• The Open Project and Open URL actions are unavailable.
• If you use the Export command (QuarkImmedia menu), the project’s complexity is limited to 10 objects, 10 interactive text strings (Hot Text panel in the QuarkImmedia palette), 5 scripts, and 5 pages. If you use the Export command with projects that exceed this complexity, an alert message will state, “This document is too complex for the demo version of QuarkImmedia to allow the export process to continue. There are too many objects, scripts, or pages.”
About QuarkImmedia Viewer
QuarkImmedia Viewer is a stand-alone application that lets you interact with QuarkImmedia projects over the Internet or on a local CD–ROM or hard disk. You don’t need QuarkImmedia or QuarkXPress to view and interact with projects created with QuarkImmedia.
Important
To use QuarkImmedia Viewer to view projects over the Internet, you need an Internet connection. You must also have a unique IP (Internet Protocol) address; this can either be a permanent IP address, or a “dynamic” IP address that is temporarily assigned to your computer each time you connect to the Internet.
Once you have QuarkImmedia Viewer installed (see “Installing the Demonstration Software” above), you can use the following URL (Uniform Resource Locator) to connect to a Web site created using QuarkImmedia:
http://www.quark.com/immedia
Using QuarkImmedia Viewer
After you install QuarkImmedia Viewer, double-click its icon to launch the application. Choose View -> Show Internet Controls to display the QuarkImmedia Internet Controls palette if it is hidden. To connect to a Web site created using QuarkImmedia, type http://www.quark.com/immedia in the Visit field, or press the Home button in the QuarkImmedia Internet Controls palette, and press Return.
To quit out of a project, type Command-Q or F15.
To improve the performance of QuarkImmedia Viewer, select the application icon in the Finder; choose Get Info from the File menu; and increase the memory allocation for the program.
Making QuarkImmedia Viewer work with your HTML browser
QuarkImmedia Viewer can work harmoniously with a compatible HTML (Hypertext Markup Language) browser. (Currently, Netscape Navigator is the only known HTML browser that is compatible with QuarkImmedia Viewer.) In order to do so, though, both applications must be configured properly. First configure QuarkImmedia Viewer to launch a compatible HTML browser when encountering files other than QuarkImmedia projects:
1. Choose Edit -> Preferences -> Internet to display the Internet Preferences dialog box.
2. Click Specify (next to WWW Browser) to display the Select a Browser directory dialog box.
3. Select your HTML browser and click Open.
To open QuarkImmedia projects from an HTML browser, QuarkImmedia must be set up as a helper application. Then, the HTML browser can automatically hand off QuarkImmedia projects to QuarkImmedia Viewer. To configure your HTML browser:
1. Display the browser preferences dialog box.
2. Create a new entry in the list of helper applications.
3. Give the new entry a MIME (Multipurpose Internet Mail Extensions) type of “application/immedia” or, if applicable, a MIME type of “application” and a MIME subtype of “immedia”.
4. Give the new entry an extension or suffix of “imd”. If applicable, give it a “description” of “QuarkImmedia”.
5. Use the Browse button to locate the QuarkImmedia Viewer application.
6. Choose or enter a File Type of ODOC.
7. Indicate that you want to launch QuarkImmedia Viewer when a QuarkImmedia project is encountered. (If you do not make this specification, the browser may simply try to save the project to your hard disk.)
Important note to America Online and CompuServe users
To use QuarkImmedia Viewer to view projects over the Internet, you need a permanent IP address or Internet access through an Internet provider that supplies you with a “dynamic” IP address while you are connected to the Internet. At this time, America Online does not provide this service. If you are a CompuServe customer, check out their new CompuServe TCP service.
Contacting Quark
For technical support, call (303) 894-8899 between the hours of 7:00 a.m. and 6:00 p.m. mountain standard time, or e-mail QImmediaTS@aol.com, 73370.1054@compuserve.com, or QImmediaSupport@quark.com.
For information about QuarkImmedia and to see a Web site created with QuarkImmedia, connect to the Internet at http://www.quark.com/immedia (see “About QuarkImmedia Viewer” above). For ordering information or to order a copy of QuarkImmedia, call us at (800) 788-7835.
The information in this document may not be modified, distributed, or disseminated in paper or electronic form without prior written consent of Quark, Inc.
Trademark Information
Quark, QuarkXPress, and XTensions are trademarks of Quark, Inc., Reg. U.S. Pat. & Tm. Off. QuarkImmedia, QuarkXPress Passport, and the Quark logo are trademarks of the Quark companies.
QuickTime and the QuickTime logo are trademarks used under license.
All other trademarks are the properties of their respective owners.
Apple Disclaimer
The following disclaimer is required by Apple Computer, Inc. It applies to Apple software only. All other software is covered by Quark’s limited warranty.
APPLE COMPUTER, INC. (“APPLE”) MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE APPLE SOFTWARE. APPLE DOES NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE APPLE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE APPLE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
IN NO EVENT WILL APPLE, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE APPLE SOFTWARE EVEN IF APPLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE MAY NOT APPLY TO YOU. APPLE’S LIABILITY TO YOU FOR ACTUAL DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE ACTION (WHETHER IN CONTRACT, TORT [INCLUDING NEGLIGENCE], PRODUCT LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50.
